| Cable Type: | Fiber Optic |
| Cable Characteristic: | Patch Cable |
| Fiber Optic Mode: | Single-mode |
| Fiber Type: | Simplex |
| Core/Cladding Diameter: | 9/125 µm |
| Fiber Category: | OS2 |
| Cable Length: | 9.8 ft |
| Connector Type on First End: | LC Network - Male |
| Connector Gender on First End: | Male |
| Connector on First End Details: | 1 x LC Network - Male |
| Connector Type on Second End: | SC Network - Male |
| Connector Gender on Second End: | Male |
| Connector on Second End Details: | 1 x SC Network - Male |
| Jacket Type: | LSZH |
| Device Supported: |
|
| Data Transfer Rate: | 100 Gbit/s |
| Features: |
|
| Color Family: | Yellow |
| Product Color: | Yellow |
| Product Material: | Polypropylene |
| Jacket Material: | Low Smoke Zero Halogen |
| Environmentally Friendly: | Yes |
| Limited Warranty: | Lifetime |
OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.
Compatibility
Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.
Engineered for Optimal Performance
Precision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to LC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fiber core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.
LSZH Cable Jacket
Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.
Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
| Manufacturer: | StarTech.com |
| Manufacturer Part Number: | SPSMLCSCOS23M |
| Manufacturer Website Address: | http://www.startech.com |
| Brand Name: | StarTech.com |
| Product Name: | Fiber Optic Simplex Patch Network Cable |
| Marketing Information: | OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Compatibility Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments. Engineered for Optimal Performance Precision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to LC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fiber core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards. LSZH Cable Jacket Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered. Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability. |
| Packaged Quantity: | 1 |
| Product Type: | Network Cable |
| Cable Type: | Fiber Optic |
| Cable Characteristic: | Patch Cable |
| Fiber Optic Mode: | Single-mode |
| Fiber Type: | Simplex |
| Core/Cladding Diameter: | 9/125 µm |
| Fiber Category: | OS2 |
| Cable Length: | 9.8 ft |
| Connector Type on First End: | LC Network - Male |
| Connector Gender on First End: | Male |
| Connector on First End Details: | 1 x LC Network - Male |
| Connector Type on Second End: | SC Network - Male |
| Connector Gender on Second End: | Male |
| Connector on Second End Details: | 1 x SC Network - Male |
| Jacket Type: | LSZH |
| Device Supported: |
|
| Data Transfer Rate: | 100 Gbit/s |
| Features: |
|
| Color Family: | Yellow |
| Product Color: | Yellow |
| Product Material: | Polypropylene |
| Jacket Material: | Low Smoke Zero Halogen |
| Environmentally Friendly: | Yes |
| Limited Warranty: | Lifetime |
Quick Reorder
Quick Entry
Help
My Account
