APC by Schneider Electric Rack PDU, Metered, 2U, 30A, 208V, (12) C13s & (4) C19 - Metered - 12 x IEC 60320 C13, 4 x IEC 60320 C19 - 230 V AC - 2U - Rack-mountable
APC by Schneider Electric Rack PDU, Metered, 2U, 30A, 208V, (12) C13s & (4) C19 - Metered - 12 x IEC 60320 C13, 4 x IEC 60320 C19 - 230 V AC - 2U - Rack-mountable
AP7811B
- Main Features
- Technical Specifications
Main Features
PDU Type: | Metered |
Plug/Connector Type: | NEMA L6-30P |
Plug/Connector Detail: | 1 |
Receptacle Type: | - IEC 60320 C13
- IEC 60320 C19
|
Receptacle Detail: | - 12 x IEC 60320 C13
- 4 x IEC 60320 C19
|
Input Voltage: | |
Output Voltage: | 208 V AC |
Input Current: | 30 A |
Mount Type: | Rack-mountable |
Rack Height: | 2U |
Cord Length: | 12 ft |
Height: | 3.46" (88 mm) |
Width: | 17.48" (444 mm) |
Depth: | 4.41" (112 mm) |
Weight (Approximate): | 3.36 kg |
Package Contents: | Rack PDU, Metered, 2U, 30A, 208V, (12) C13s & (4) C19 Cord retention bracket(s)Installation guideRack mounting bracketsUser manual |
Environmentally Friendly: | Yes |
Environmental Certification: | RoHS |
Limited Warranty: | 2 Year |
Additional Warranty Information: | 2 years repair or replace |
Marketing information
Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.Explore APC Rack Power Distribution in 3D animation.
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.
More from the Manufacturer
General Information
Manufacturer: | Schneider Electric SA |
Manufacturer Part Number: | AP7811B |
Manufacturer Website Address: | http://www.schneider-electric.com |
Brand Name: | APC by Schneider Electric |
Product Line: | Metered Rack |
Product Name: | Rack PDU, Metered, 2U, 30A, 208V, (12) C13s & (4) C19 |
Marketing Information: | Metered rack Power Distribution Units (PDUs) provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.
Explore APC Rack Power Distribution in 3D animation. APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. More from the Manufacturer |
Product Type: | PDU |
Technical Information
PDU Type: | Metered |
Plug/Connector Type: | NEMA L6-30P |
Plug/Connector Detail: | 1 |
Receptacle Type: | - IEC 60320 C13
- IEC 60320 C19
|
Receptacle Detail: | - 12 x IEC 60320 C13
- 4 x IEC 60320 C19
|
Power Description
Input Voltage: | |
Output Voltage: | 208 V AC |
Input Current: | 30 A |
Physical Characteristics
Mount Type: | Rack-mountable |
Rack Height: | 2U |
Cord Length: | 12 ft |
Height: | 3.46" (88 mm) |
Width: | 17.48" (444 mm) |
Depth: | 4.41" (112 mm) |
Weight (Approximate): | 3.36 kg |
Miscellaneous
Package Contents: | Rack PDU, Metered, 2U, 30A, 208V, (12) C13s & (4) C19 Cord retention bracket(s)Installation guideRack mounting bracketsUser manual |
Environmentally Friendly: | Yes |
Environmental Certification: | RoHS |
Warranty
Limited Warranty: | 2 Year |
Additional Warranty Information: | 2 years repair or replace |
Customer Reviews
There have been no reviews for this product.
Other products to consider
Xbox Series X DIABLO IV Bundle
Hyper HyperDrive Next Dual 4K HDMI 7 Port USB-C Hub
Winnable Retractable Belt Clip